BSA Variable Choke Silencer BSA

IMPORTANT PLEASE NOTE

All silencers ordered separately will incur a £15.00 delivery charge as legally they have to be delivered to a third party Firearms Dealer. It is illegal to send silencers through the post direct to an individual. However if you order a silencer with an air rifle this charge will be removed.

This latest-generation silencer actually allows the shooter to match its internal specification to suit the calibre of the rifle. Its supplied with an Allen key, which permits the removal of the end of the silencer, so that different size restrictors can be fitted. Increasing or decreasing the muzzle aperture according to calibre to maximise the reduction in noise-energy as the pellet leaves the moderator. This ‘variable choke’ facility turns this silencer into one of the most useful hunting accessories of all time.

BSA VC Silencer is supplied with 2- interchangeable muzzle restrictors that should be matched to the calibre of the airgun it is to be fitted to. The black restrictor must be fitted to .177 (4.5mm) calibre airguns. The white restrictor must be fitted to .22 (5.5mm) calibre airguns. The silencer is supplied with the white restrictor pre-fitted. Please note both restrictors have oversize holes to allow for barrels that have non – concentric bores. If the silencer is to be used on .25 (6.35mm) calibre airguns, no restrictors are fitted. Access to the restrictor is gained by removing the restrictor screw from the Silencer end cap using the 8mm Allen key provided.